-
I've tried everything. Even ```#undef termios``` to no avail.
``` C++
In file included from ../src/sbus_driver.c:8:
In file included from /usr/include/arm-linux-gnueabihf/asm/termbits.h:1:
/usr/in…
-
I am trying to send smartport telementry to the s.port pin on Jumper T-lite from ESP32.
Internal RF is off, External RF is set to SBUS.
In documentation I was able to find, smartport protocol is…
-
hi,
i wrote a patch (for 3.2) to use the drop-bit from SBUS to generate an rssi-value:
http://www.multixmedia.org/test/ardupilot-sbus-rssi.diff
http://www.multixmedia.org/test/PX4Firmware-sbus-rssi.d…
-
I have suffered two unintentional parachute release, the cause of these deploys is a high pulse (greater than 1800) on channel 7, which is assigned the function of "parachute release".
These pulses h…
-
I'm getting some quite good results with my Arduino BLE setup (I'm using the more expensive, PARA BLE module with onboard antenna, which I've soldered into my TX16S), but even after playing around wit…
-
First of all, I love your Widget ! :) That's a great job.
I updated it to work with Inav + Crossfire on my Horus X10 - openTX2.2.2
I changed the code to read CRSF protocol and MSP over CRSF.
And …
-
### Description of the problem
Network interface doesn't appear despite ethernet dongle lighting up and aqc111 device driver loading.
This is using version 1.3.3.0-4.
### Description of your …
-
I recently (rather late!) downloaded the most recent RF24 library and updated my radio control project. The transmitter worked perfectly and immediately without any code changes. But when I updated th…
-
Hello,
I try to use your code with a X8R and a Pro Mini.
I try this code:
`/*
SBUS_example.ino
Brian R Taylor
brian.taylor@bolderflight.com
Copyright (c) 2016 Bolder Flight Systems
Permiss…
-
Using an Arduino Mega 2560 with a FrySky R-XSR. I am using the SBUS_example.ino (as a base) on Serial2 (Pin 17 RX) and verified the program starts and the main loop runs but I never get inside the if
…