-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Trying to run STM32CubeU5\Projects\NUCLEO-U5A5ZJ-Q\Applications\USBX\Ux_Device_CDC_ACM of **main** branch with HSI facing the issue of MX_USB_OTG_HS_PCD_Init() timeout with MSIS
* Nucleo U5A5ZJ-Q
…
-
I have a nucleo with a stm32u5a5 chip https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html . It seems like I cannot communicate with it using probe-rs:
```
kzm@kzm-bpq:~$ probe-rs --version…
-
**Describe the bug**
Performing an ADC read on a channel will leave that channel activated in the channel select register (e.g. ADC4->CHSEL). This will cause issues when attempting to read from a new…
-
Hi,
Thank you for the example. As far as I know, you did not include any self-test procedure here. I would have used a self-test kind of job after the first OTA-like job completes. Especially when …
-
**Describe the bug**
Hello. I am playing with a **nucleo_u575zi_q** and noticed that the flash driver did not matched the reference manual when writing. While the manual specifies that only quad-wo…
-
The current approach to multi-component instances is documented here: https://open-cmsis-pack.github.io/Open-CMSIS-Pack-Spec/main/html/pdsc_components_pg.html#Component_Instances
In the `projmgr` i…
-
**Describe the bug**
For the STM32U5 The LPTIM2 clock enable should be bit 5 of RCC APB1 clock enable register 2 (RM0456 Rev 4 11.8.34).
See #63655 for fix.
**To Reproduce**
Enable LPTIM2 …
-
I am trying to get inspiration from the example at https://github.com/embassy-rs/embassy/tree/main/examples/stm32u5 to understand how to "start" a new project with embassy.
If I understand correctl…
-
*
**Describe the bug**
I tried sample, samples\sensor\soc_voltage.
**To Reproduce**
Steps to reproduce the behavior:
1. west build -p auto -b b_u585i_iot02a samples\sensor\soc_voltage
2. west …
JiiZR updated
11 months ago