-
MCU:esp32 , Wireless module:LLCC68 ; Arduino IDE version :1.8.15
when radio.begin() get error -707
and radio.begin(868.0, 250.0, 7, 5, 0x34, 22, 10, 0, false); when send mesage get erro timeout.
…
-
Hi,
I would like to use your software to integrate a Bresser 9602510 (5in1) sensor via MQTT into my system.
I can't get it to work. I already stopped after "Starting execution..."
I followed your…
-
@Imen-D
I have just pushed support for the 31 Hz mode. On the Sx1280 it appears to work great. Could you test it also for the SX1262? All you need to do is setting the mode in common_config.h
T…
-
#### Summary
Once #497 is merged, lets add more common devices from https://www.semtech.com/products/wireless-rf/lora-core and the LR1110 in the same format.
#### Why do we need this ?
…
-
Just trying to get my SX1262MB2CAS shield working w/ an Arduino Uno. One of the commands is failing during the begin command.
The only thing modified here is the `radio.begin` call, which I belie…
TJ178 updated
2 years ago
-
Recently I have added support for the LLCC68 module in DIY devices (#918).
This module can work with the current firmware to a limited extent since it does not support Spreading Factor 12 (13.4.5.2…
-
This is my setting。
`#define CFG_BT_USE_BLE true `
My APRS.FI can be connected to ESP32 (BLE), but the app sends packet, ESP32 does not work (TX LORA signal)
![photo_2022-06-16_14-13-20](htt…
-
I am connecting a [eByte E22-900M22](http://www.ebyte.com/en/product-view-news.aspx?id=437) module with the SX1262 chip. This module has DIO1 and DIO2 exposed, but DIO2 (in my setup) is used to contro…
-
**IMPORTANT: Before submitting an issue, please check the following:**
1. **Read [CONTRIBUTING.md](https://github.com/jgromes/RadioLib/blob/master/CONTRIBUTING.md)!** Issues that do not follow this d…
-
Hi, I searching for alternative library to https://github.com/sandeepmistry/arduino-LoRa
Is there some Channel Activity Detection or something to tell my if is channel free?
Is supported SamD21?
…