-
Contingent on https://github.com/SterlingPeet/fprime-arduino/pull/12, perhaps it's worth considering changing the default toolchain from the teensy41 to an rp2040 platform (s.a., the rpi pico w I've b…
-
Hello.
I'm running below test code. It does produce unexpected result on my setup. I know it might not be QNEthernet fault but I have nowere to go for help.
```c
#if !(defined(CORE_TEENSY) && def…
-
As far as I understood, the MultipleSteppers example only works with an integrated acceleration/declaration.
For my application I want to run different segments one after another (Polyline to inter…
-
![Screenshot from 2023-08-18 12-32-20](https://github.com/fprime-community/fprime-baremetal-reference/assets/14095576/8e2378f2-491d-450a-993b-09b51f11a590)
![Screenshot from 2023-08-18 12-41-34](http…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.3.1 on 2022-06-22; Teensy 4.1 with IMXRT1062DVJ6A
Board ID:teensy41
```
### Code/REPL
```python
import time
import board
import busi…
-
For the Teensy boards, I'm wondering if it's possible to flash a previously compiled hex file without having to run `fprime-util build` to wait for the Teensy window to pop up
-
Hi,
Using Arduino ide 2.2.1 and v1.1.4 of the library, the usb device is reinitialized about every 5 seconds on a Teensy 4.1, there are no issues with a Teensy 3.6.
The problem is fixed by changi…
-
Hi, I try to use Websockets with AsyncWebServer_Teensy41.
I don´t know the Problem is in QNEthernet.
Looking on the incoming Data with Wireshark i´ve see the OPCODE is not transfered how it should.
…
-
I have searched a lot over the internet but could not figure out the G-code syntax for touch off and saving that tool height in non-volatile memory just like work offsets. What are all queries related…
-
I am trying to build micro_ros_platformio for a Teensy4.1 but I get a lot of warnings from "ar" at the end of the build but no fatal error. Here is a picture of those warning.
Further in the bu…