-
Hi there!
I've been working through your code trying to get it running on a Pi Zero W with a TMC5160
http://www.farnell.com/datasheets/2786292.pdf
I haven't changed any of the code in tmc…
-
It would be a nice new feature to connect the Vref pins of the TMC Stepper driver to the free analog pins and read out the Voltage or direct the calculated motor current over the Terminal. This would …
-
i messed with the config file all day and i don't know what im doing wrong.
when i auto home the head goes to X:130 Y:160 instead 110x110
when i try to level the bed it goes outside of the bed.
my …
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…
-
- Description: If you tie both _MAX and _MIN for an axis to the TMC2130 diag pin and attempt to enable ENDSTOPS_ALWAYS_ON_DEFAULT, the axis will lockup as soon as a limit is reached.
- Expected behav…
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
Hello!
I am trying to change the filament using the M600 command without an LCD screen and an encoder. The way I want to do it, is calling other M commands when the printer asks for input.
I hav…
-
I installed BLtouch on my homemade printer with Marlin 1.1.9 recently and it doesn't compensate the bed leveling. Before I installed BLtouch, the bed limit switch for Z axis seems to work perfectly wi…
-
### I need help on my 3d Printer, the bed size is 400,400 but i only try to use 330 by 300 but when i do the bilinear auto bed leveling it would say probing failed at the 7th probe, i tried reduci…
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…