-
Hello,
I tried several examples and different parameters on the examples provided, and none of them allowed me to reach the 1/3 of the motor speed.
At this time, I'm running the driver TMC5161 f…
-
I'd like to try out the code for the BTT SKR E3 Mini v2.0 board that's being worked on in #2. I understand that Eclipse is grblHAL's IDE of choice but I'd prefer to use something that's less of an in…
-
The X stepper runs as expected.
Y & Z, however run at about 1/4 of the proper speed, and distance.
If I flash the stock firmware, and run it, and then flash grblHAL, without removing power, the …
-
### Wiki Search Terms
Z Motor Lock
### Controller Board
MKS DLC32
### Machine Description
Laser core XY Z
### Input Circuits
_No response_
### Configuration file
```yaml
board: MKS-DLC32 V2.…
-
Hello,
I'm currently trying to drive a stepper motor which drives a linear stage to move something around. I have a fysetc v3.0 TMC2209 connected to a CNC shield v3 which sits on an arduino mega 25…
-
What about use better motor drivers with 32 microsteps... is this possible in future versions of Rambo?
-
Hello, schematic file has a really bad resolution. Here's the full resolution file:
[Tango V1 schema.pdf](https://github.com/bigtreetech/Tango-3D-Printer-Motherboard/files/2677518/Tango.V1.schema.pdf…
-
Hello all,
I am remarkably new to this world and have been struggling trying to get this to work. I am using a Teensy 4.1 and a [TMC5160 BOB v1.2](https://www.trinamic.com/fileadmin/assets/Products…
-
Hi @teemuatlut,
thanks for updating the TRAMS board and all the work you do with the TMC2130/2208.
Wouldn't it be possible to use the TMC2130Stepper code also for the TMC5130 stepper drivers? As f…
-
I'm using this lib on a digispark pro with oled against 4 x tmc2209s in a grbl machine. It's completely parallel to the grbl controller.
I'm enabling all of the advanced tmc features: hybrid stealth/…