-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
I get the following error when building on a pi4 with ROS melodic -
[ 98%] Linking CXX executable /home/pi/catkin_ws/devel/lib/ublox_gps/ublox_gps
/usr/bin/ld: CMakeFiles/ublox_gps_node.dir/src/no…
-
Starting >>> ublox_serialization
Finished > ublox_msgs
Finished > ublox_gps
--- stderr: ublox_gps
CMake Error at /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArg…
-
Hi
Coming from melodic, I always enjoyed analyzing bag data using rqt_bag tool. Recently, I started a new project using ROS2 iron and also jazzy and I noticed that the rqt_bag tool is almost unusab…
-
The examples [ublox.ino](https://github.com/SlashDevin/NeoGPS/blob/master/examples/ublox/ublox.ino) and [PUBX.ino](https://github.com/SlashDevin/NeoGPS/blob/master/examples/PUBX/PUBX.ino) both fail to…
-
If I use default ( gps only) config everything work on the galactic branch.
zed_f9p.yaml
gnss:
glonass: True
When I enable glonass I get this error.
`[ublox_gps_node-1] [DEBUG] [16…
-
I've been trying to get the M8M GPS to work with this driver without any success so far. I always get the what() error when launching, and I'm not sure if there's something I haven't configured right …
-
リスト:
- 今使っているGPSモジュール
- 製品: [Micro M8N GPS](http://www.holybro.com/product/micro-m8n-gps/)
- GPSチップ: [ublox M8N](https://www.u-blox.com/en/product/neo-m8-series?lang=ja#tab-product-selection…