-
Hello - I'm testing the TMC2209 BIGTREETECH v 1.3 drivers without UART config and no matter which microstepping option I set via MS1/MS2 pins or what potentiometer value I set (tested max clockwise / …
-
I was messing about with "4_Axis_SPI_CNC" code and my laser galvo/stepper setup.
The ESP32 now seems to be stuck in a boot loop. Keeps throwing errors.
My guess is I managed to mess up GRBL setting…
-
Good night,
I just installed the module on my own stepper as DIY.
I have changed in configuration from original UART 2209 to A5984, also removed UARt jumper and installed all harware.
I move …
-
Hello,
No issue with your code, just interested in how the KCM-B166s are holding up?
-
### Description of the bug
When Arachne engine is on, the produced gcode induces the printer into what looks like high stuttering, when printing the outer perimeter of the inside (3d model attached).…
-
### Bug Description
Configuring for LK5 Pro.
1) In the support LKx Pro branch, in the default/example configuration.h, line 150, #define SERIAL_PORT 0 generates a compile error. Changing the 0 t…
-
I have problem with homing axis , when sent Gcode G28 Y0 or G28 Z0 use Repetier host V2.1.3, I got homing Axis always on X axes , I use CoreXYZ printer type, are there there something wrong on my con…
-
### Bug Description
following the Luxuri wiki. added an official BL Touch. I measured and calculated my XY probe offset. They were about .5mm off so I'm confident that my offset settings are correct.…
-
You use 12v stepper motors. Try motors which are spec'd at 3 to 4v.
Those 12v stepper motors are inappropriate for 3d printers/plotters etc.
I have a bunch of 12v steppers and they collect dust in …
-
### Description
I have been fighting during one week trying to solve freezing prints over six identical machines with the following hardware:
SKR MINI V1.1
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_…