-
Hello,
I'm digging into my car (2015year smart fortwo electric). ED BMSdiag is up and running fine - I can get BMS, cooling, etc info.
Now I want to dig deeper and control charging cycle. First of…
-
ZNDMWG04LM does not reset password firmware 1.0.7_0019
== Gateway Global Tool version:20240218==
>>Power ON Gateway NOW!name=ms_main_intc, parent=gic
ms_init_pm_intc: np->name=ms_pm_intc, pa…
-
I've cloned the repository, copied the rules-file to `/etc/udev/rules.d/`, and connected a Vernier temperature probe to the laptop via a Go! Link, but when I run the test program, this is the output:
…
-
Add input pin to check whether the battery is plugged into the car or is on the charging hand cart and automatically reconfigure the CAN-bus when connected to the handcart.
-
Hi, I'm having a hard time figuring out whether this library supports CAN2.0A only or if CAN2.0B (extended) is supported also.
-
Hello Collin,
Thanks for open a window for asking your expert help. I am trying to build communication on CAN bus using your library.
My system: on one side, NVidia TX2 (with CAN controller CAN M…
-
### Description
When using the CAN bus under EPS32, the target is not supported error.
System Information
HAL build info: nanoCLR running @ ESP32 built with ESP-IDF ac5d805
Target: ESP32_B…
-
**Which section of robot code is this for?**
CAN Bus Interface
**Description of feature**
* Develop a class to interface with the CAN Network on the robot:
* Connect to network
* Send c…
-
Hi Sergey,
the proposed way (#8) to detect another Bus Master ownership with the implementation in:
https://github.com/sshuv/iicmb/blob/b0f6e5916a1a3ee016e685f3219ff459498d231d/software/irq/iicm…
-
**Is your feature request related to a problem? Please describe.**
I2C can be flaky, some of my systems may end up some distance from main compute module.
**Describe the solution you'd like**
Add…
samuk updated
9 months ago