teachop FlexCAN_Library issues

teachop / FlexCAN_Library

Arduino library for CAN on Teensy 3.1

The Unlicense

155 stars 122 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Does FlexCan works with arduino uno or mega? how?

#36 muliapratama opened 1 year ago
0
Use Library functions in interrupt

#35 AndreasZaum opened 3 years ago
0
Teensy 4.0

#34 Popov77 opened 4 years ago
2
Add CAN Bus standards supported

#33 andrey-gvrd opened 4 years ago
1
Enable pins of CAN bus is reversed

#32 wt70707 opened 5 years ago
5
freeze mode

#31 tonton81 opened 6 years ago
0
Added TI TCAN334G to list of working xcvrs

#30 PRWald opened 6 years ago
0
ReadMe.md Lines 6 & 14 Connecting Teensy to Transceiver

#29 CNCQuilter opened 7 years ago
2
Bus Off Recover

#28 nikosp11 opened 7 years ago
1
Can message looping on Teensy 3.6

#27 Ligozila closed 7 years ago
3
Add support for listen only mode

#26 ThyMYthOS opened 7 years ago
3
Special Baud speed

#25 roblesterjr04 opened 7 years ago
2
Tested MCP2551 and MCP2561 CAN transceivers

#24 nathancheek opened 7 years ago
0
Added TI ISO1050DUB as tested CAN transceiver

#23 mrbubble62 closed 1 year ago
0
converting else-if to switch-case (lines 42-79)

#22 elhayra opened 7 years ago
6
Patch 3

#21 H4nky84 opened 8 years ago
2
No indication of full buffers

#20 riodda opened 8 years ago
2
Support for Teensy 3.5 and 3.6 (dual CAN) + alternative CAN pins

#19 pawelsky opened 8 years ago
17
How to get raw data?

#18 frmdstryr closed 8 years ago
5
Some changes.

#17 xboxpro1 opened 8 years ago
2
Patch 2

#16 H4nky84 opened 8 years ago
1
mac osx interface

#15 antimodular closed 8 years ago
1
Added 33333 bps

#14 Mike4U opened 8 years ago
6
MCP2551 and MCP2515 or just MCP2551?

#13 antimodular closed 8 years ago
8
Clarify the license of this library

#12 sarfata closed 8 years ago
2
Automotive OBDII CAN ports are already terminated.

#11 Mike4U closed 8 years ago
4
CAN 33.33kbps for the GMSWCAN be supported?

#10 Mike4U closed 8 years ago
1
ESR1 SYNCH

#9 xboxpro1 opened 8 years ago
1
added LT1796 as tested can transceiver

#8 Flydroid closed 9 years ago
0
add lower baudrates

#7 teachop closed 10 years ago
0
Small improvement to the documentation, should solve the recurring forum question about which pins.

#6 PaulStoffregen closed 10 years ago
0
clock can from 16mhz xtal

#5 teachop closed 10 years ago
2
startMillis uninitialized warning

#4 pawelsky closed 10 years ago
1
FLEXCAN_RERRSYNR_check_BEn_Bit redefined

#3 pawelsky closed 10 years ago
1
include some transceiver option in the documentation

#2 olmerg closed 10 years ago
1
Enabled RX FIFO, added available() method

#1 ghost closed 10 years ago
2