-
Hi,
I realizaed that randomly while printing, the steppers start to make noise and become very very hot, more than 80C (untouchable).
After lots of reading and tests, i think the problem comes w…
-
Please leave a message below with electric symbols you would like to have.
Please, if possible, add a picture of the symbol to help my life. =)
- [x] Add MOSFET 3-terminal (no bulk) symbols
-…
-
@conuthead
for comparison :
blheli32 Wraith32 50A
f051bldc Wraith32 32A
your fw works well with 3S.
with 4S it desynchs at (1770 PWM).
Overall the efficiency N/W is better than blheli (on…
-
Hi all-- first, I actually have the TexElec hardware, but from what I understand, on the bus it should be the same.
It disables the joystick port (like the model 56) because of conflicts with SCSI …
mlyle updated
3 years ago
-
Hi,
Thanks for great project. could you suggest a simple carrier board for RPI pico to turn it into oscilloscope?
A very simple one like [THIS](https://time4ee.com/news.php?readmore=443) (with 2 re…
-
Maybe a future TODO item. Or at least a placeholder issue for the topic.
FM Towns is another series of Japanese x86 non pc-compatible computers.
https://en.wikipedia.org/wiki/FM_Towns
-
Thanks for this incredible resource! I used it to replace all mentioned capacitors in the PSU of my VaxStation 3100 model 38
I have two questions:
1. There is a big square capacitor in my PSU which …
-
No CANBUS reading from Wideband to Rusefi ECU.
Using original release wideband firmware canbus wideband values are received fine but sensor eventually times out on goes into error.
Using second rel…
-
Hello @BonneelP
could you tell my why the bore shape is only regarded if sym == 1 (see Lamination.get_bore_desc line 33).
OT: Big sorry for having not finished 'electrical' yet.
Best regard…
-
First of all I do not think this is a gShield problem itself, as the same gShield is working perfectly fine with Arduino Uno and GRBL. I would guess that the problem comes from Arduino Due, which is c…