-
Good Day,
I have a problem with connecting this LCD to my MKS Gen L V2.1 on Marlin 2.0.9.1.
LCD lights up, but no visible text appears.
EXP1 wire inverted (if it wasn't nothing would have appeare…
-
Hello
I got the PIS installed and everything works fine.
But when i remove the PIS and reboot Klipper, it wont Boot and an Error shows "Not able to connect to MCU" or something.
Does the PIS no…
-
Hi,
I'm at the moment trying to get my Voron running.
I've got the Spider v2.2 with 7 TMC 2209 v3.1 drivers installed.
I installed every jumper as shown in the instruction.
I Already tried to …
-
### Bug Description
Dear Marlin firmware developers,
I have got troubles with my 3d printer with FYSETC S6 mainboard onboard connected to DGUS (DWIN Graphical Utility Software) LCD. Everything…
-
Does the Diag-Pins from the Stepper needed to bend by side or cutted of if using the Fystec TMC2209 V3.1 with the Spider V1 WITH Endstops?
-
Would be great to have a CAN Bus, for sure with CanBoot from the (in my case) PI to the (in my case) Fysetc Spider Board to (in my case) SB2040.
Would be very easy to update the firmware and no more…
-
How do i make a new Bootloader_FYSETC_SPIDER.hex file to upload to my controller?
Sorry for the basic question - been chasing my tail for over a day trying to get the spider v 2.2 flashed with firmwa…
-
On the [Mini12864 documenation](https://docs.vorondesign.com/build/electrical/mini12864_klipper_guide.html), it tells you to remove certain components from the display board. In the case of BTT, it's …
-
The ststm32 core for platformio defines a dependency on tool-dfuutil, but that package does not seem to be available for linux_aarch64 so installing the platform fails. I am not actually using dfu for…
-
On the Fystec 2209 v3.0 the RX & TX pins are shifted compared to previous versions, so in order to use UART with SKR v1.4 board, you need to set the jumpers on SKR like the first picture, also you ne…