-
## Expected Behavior
ppolyf_u_2k_6p0 has a sheet resistance of 2k/square.
## Actual Behavior
The resistance is much lower than this (68 ohm).
This is also true for the other ppolyf resisto…
-
AFAIK the name of the PDK is simply `sg13g2`? At least that's what it says in the [KLayout tech file](https://github.com/IHP-GmbH/IHP-Open-PDK/blob/main/ihp-sg13g2/libs.tech/klayout/tech/sg13g2.lyt).
…
-
It seems that the precheck runs out of memory during klayout check causing the following traceback when being run on github actions:
```
{{STEP UPDATE}} Executing Check 3 of 4: Klayout BEOL
Traceba…
-
### Description
I've encountered a hash mismatch error when running `nix-shell` with the latest OpenLane2 main branch (commit b0246e634e31fbf8c6e22ef1cc46ef4ffd1e5201). Since June, I have been succ…
-
### Description
Parasitic extraction through OpenRCX is likely incorrect because of a limitation with OpenRCX at the moment. The OpenROAD were able to generate a good deck located at https://github.c…
-
Expected behavior: The fetch operation should complete successfully without errors.
Git version: git version 2.43.0
Repository URL: https://github.com/RTimothyEdwards/open_pdks
Operating Syst…
-
### Description
Hello,
While running synthesis on my design, there is an error in synthesis stage.
ERROR: Unimplemented compiler directive or undefined macro `suppress_faults.
The reproducible pac…
-
After using the sky130 PDK, I was trying to test the tool with a proprietary PDK for a different technology.
In order to do that, the instructions from the "Porting a PDK" documentation section (ht…
-
### Describe the bug
I'm getting this transient error (same design run twice will finish on some runs and fail on others.
The failure in detailed routing is
```
Error: clknet_4_6_0_clk 1 pin not …
-
### Describe the bug
I've noticed a slowness in gui which is very annoying. It seems this comes from the console input & output.
Using the following procedure:
proc measure_time {} {
…