-
I am a bit stuck here. Finally tried to get homemod working.
If I use the basic_cia402 driver, I am unable to set
```
```
6 amps into a 2 amp motor may not be wise.
If I use …
-
Hello,
I would like to scale up the observatory or create a larger design. I am aware that the number of teeth on the gears will change. Can this be corrected through software? How does the program …
-
it would be good to detect extreme motor usage for example when the end-effector is blocked by a foreign object or a position cannot be reached for whatever reason. Those type of situations should be …
-
### Game details
SCPS-45412 Metal Gear Solid - Integral (Japan, Asia)
### Description of the issue/bug
Hello. I want to say that I'm grateful because someone is keeping the Nintendo Switch po…
-
I have a 2 motor vehicle (Tesla kids power car).
Can I just connect both motors to the same motor driver or would I need 2 motor drivers?
Thanks for this nice project!!
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The board reboots while homing the Z-axis.
The issue occurs inside the `do_homing_move()` …
-
I'm trying to run a Nanotec motor through the ros2_canopen stack.
Following the documentation and trinamic [tutorial](https://ros-industrial.github.io/ros2_canopen/manual/humble/application/trinamic…
-
Using Arduino IDE 2.1.0, I open up the example sketch "MotorTest.ino" from the Serial Controlled Motor Driver library (v1.04), choose the RedBoard Artemis Nano (I've got v2.2.1 of SparkFun Apollo3 Boa…
-
Ordered for testing:
**Drivers:**
[A4988](https://www.amazon.com/gp/product/B07BND65C8/)
[TMC2209 V1.3](https://www.amazon.com/gp/product/B07ZPYKL46/)
[DM556](https://www.amazon.com/gp/product/B…
-
Hi there..
I have had some code working for a long time where I used a LILYGO SIM7000G unit connected to a DRV8871 motor driver through pins 32 and 33, and a servo connected to PIN 12. But suddenly…