-
Yesterday I got an omnibus f4 pro board from AliExpress. I tried to add external compass and GPS module (HMC5883L and Ublox Neo6M). fortunately the GPS is detected after connecting to the UART6, but t…
-
**Describe the bug**
The CUAV GPS V5 magnetometer connected to a Drotek Pixhawk 3 Pro or a Pixracer does not seem to get detected.
**To Reproduce**
1. Connect GPS/mag to a Pixracer.
2. Check `li…
-
Thomas,
I saw that GNSS library is syncing RTC in background and I have 2 questions about that:
- Is it possible to disable this auto-sync
- Can we know when a sync has happened (at least first o…
-
Hello, can someone please tell me if this custom fields HDOP, VDOP work with a NEO-M8N ? thank you for your response.
Fbo06 updated
4 years ago
-
1. Stratux version: v1.6r1-eu011
2. Stratux config:
SDR
- [ ] single
- [X] dual
GPS
- [X] yes
- [ ] no
type: UBlox NEO-M8N
AHRS
- [x] ye…
-
### Subject of the issue
Hi,
I have connected uBlox MAX-7Q to Arduino Nano. Using this library and example "Example11_UseUart" from this library I was able to connect uBlox to Arduino, but all I rec…
-
### Board and Version
Matek F405-wing
INAV/MATEKF405SE 2.0.0 Jul 12 2018 / 11:30:25 (81ce75745)
### Behavior
No GPS's work, on any UARTs. I've tried 3 different known-working Neo-M8N's on all th…
-
Hi,
I am facing a possible bug with one external and two internal magnetometers. The used firmware is 1.8.2 (stable) with pixhawk 3 pro (by Drotek). External compass is DP0105 (NEO-M8N GPS + LIS3MDL M…
-
The purpose would be to use the same systems as NTP and position server, whilst ubxtool is running.
-
I have come across a hardfault as shared in this fault log. Before this log, I have been extensively tuning the rollrate PID's. I was changing the `MC_ROLLRATE_P` parameter while the copter was on fli…