-
**NOTE to Googlers:
If you came here to look on how to get open62541 running on freeRTOS, stop reading here and have a look into #2511**
----------------
i am very interested to have an embed…
-
Hi,
I'm currently attempting to get this library to work with STM32F767ZI and SDIO.
The library doesn't compile due to undefined `BSP_SD_CardInfo` of FatFs `sd_diskio.c`, if I relabel `BSP_SD_Card…
-
**Describe the bug**
The sample of lz4 compression is failing to build on at least three boards that I tried to compile: `nucleo_f767zi`, `nrf52840dk_nrf52840` and `lpcxpresso55s69_cpu0`.
On tagged …
-
Hi
So, I was trying to load some sample sketches on my Arduino Nano ESP32, and when I loaded the sketch, the screen stayed white. I did all the necessary setup, checked the wires, etc. Nothing. I eve…
-
### Description
Requesting HAL support for STMicroelectronics STM32 Nucleo-144 boards based on newer STMicro STM32H7 Cortex-M7 MCU.
STMicroelectronics now has relatively inexpensive deve…
-
Hi! I am able to successfully load firmware in NUCLEO-F103RB if the NUCLEO is no modified, with its own STLINK connected internally via PCB and supplied by USB. However, when y cut ST-LINKV2 of NUCLEO…
-
Raised in Discord https://discord.com/channels/720317445772017664/883445358821249084/1209677653259329568 but no response and this seems to pretty clearly be a problem in the STM32 driver inside the Ze…
-
I have question, When I try to compile the file project, Python will report an error, causing the project to fail to compile.
## Issue template
- Hardware description: Processing nucleo_f767zi (…
-
Board: Nucleo-f756ZG and Nucleo-F767ZI
When i reset quickly board using reset button during execute below code, The board set RDP protection Level 1.
Below code contains only rootcause. I know tha…
-
Hi, I'm trying to use the STM32Ethernet library to create a web server but I'm having problems when using it with FreeRTOS. I crashed FreeRTOS after trying several times to refresh a simple html page.…