-
By analyzing openwifi-hw and sdr.c, we think openwifi_tx_interrupt using the s2mm_intr as the interrupt signal. But the s2mm_intr is related with the Rx, which means it only occurs when data is receiv…
-
Hi,Dr Jiao
I tried to get both boards to work in ad-hoc mode, but by ILA signal grabbing, I found that the modulation on the transmitter has always been BPSK (grabbing the rate of the dot_11 in the o…
-
When I use OpenWiFi for Batman-Adv networking, I find that nodes cannot discover each other. I couldn't find a problem, so I configured the mesh directly between the nodes as follows
->iw dev sdr0 in…
-
I am reaching out to address an issue I've encountered with the uImage in the new kernel version, which seems to be having trouble recognizing modules from the previous kernel version.
Upon further…
-
焦博士您好!请问为什么将两块板子用同轴电缆相连,也会丢包,并且将最大重传次数定为1时,两块板子用同轴电缆相连丢包率达到了7%,丢包的问题大概会出现在哪些地方?
-
openwifi currently uses FDD mode to realize simultaneous receiving and transmitting, but when AP is working, I find that their receiving and transmitting frequency Settings are the same. Isn't FDD req…
-
## Description
Keeping track of the existing alternatives in the space to replace the WNDR 3700v2, 3800 series of APs
Current options:
- ~~`TPLink C2600`~~ - https://www.tp-link.com/us/home-netwo…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
I've already sent it.
1. Our image is used directly or you build your own image?
I used your image.
2. What is your own mod…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
Sent
1. Our image is used directly or you build your own image?
I used the image "openwifi-1.4.0-notter.img" unzipped from…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …