-
I am unable to change the Max CH setpoint.
My boiler is set to a maximum temperature of 80°C.
OTGW has a (default?) Max CH setpoint of 70°C
I tried setting it to match my boilers temp of max te…
-
2 years since the latest commit on this project.
Is it still a viable solution to use with a OTGW and Domoticz today?
-
### PROBLEM DESCRIPTION
I've got a climate entity based on OTGW. When I add this entity to a cardThermo, I see a clickable text 'Mo' in the left-bottom-corner. What is it and how can I get rid …
-
An anoying error window keeps poping up when i connect to my OTGW.
The windows is blocking and i have to close it to be able to control otmonitor.
Only to reapear after a few seconds, making it almo…
-
When I try to download the new OTGW PIC version (6.5) to the ESP the size shows 0. After I then try to flash this firmware, it still shows version 6.4 as the installed PIC firmware version.
-
https://github.com/rvdbreemen/OTGW-firmware/wiki/How-to-use-it-with-Home-Assistant-or-Domoticz-or-others
Could you add Homey as a supported platform? I posted instructions on how to use with Homey …
-
Setup:
OTGW v2.8
PIC16F1847 v6.4
Wemos D1 mini v0.10.0+eeeb22c
Domoticz 2022.2 - native OTGW interface using PS=1 mode
Remeha Calenta and iSense thermostat
Sporadically some OTGW sensors show …
-
I noticed some issues with the mqtt autodiscovery plugin in domotiz since installation of the OTGW:
my zigbee devices became unreliable.
It turns out that with MQTT enabled on OTGW there is a floo…
-
In Domoticz I use the Hardware interface "MQTT Auto Discovery Client Gateway with LAN interface" to collect all the boiler sensors from my OTGW.
This works great with one exception.
The Domoticz Err…
-
I have an OTGW (PIC16F1847) with a WeMos D1 module from Nodo-Shop. The PIC has firmware 6.2 and the WeMos D1 firmware 0.9.5 (the latest).
Earlier I flashed the PIC firmware using a USB cable, but t…