-
I am having trouble getting the click interrupts to work for the LSM303D. using the library provided by Pololu for arduino I can get this code working for the DLHC
```
#include
#include
long…
-
This is not so much an Issue with the library, more a question. I had a generic Aliexpress SH1106 SPI display hooked up to a Nano33 BLE and it ran the U8G2 examples fine.
For some unrelated reason…
-
Then that's me pretty much covered : )
-
## Список необходимого
#### [Самодельные детали](https://github.com/Morn91/Slider/issues/1#issuecomment-96765375)
> - **3** детали делаются на фрезерном станке
> - **4** одинаковые детали — на токарн…
-
-
The current setup emits a lot of audible noise from the speakers when both the RPi and the amp are powered from the same power source. Observed first in the prototype using the Pololu 5V DCDC converte…
-
Hello. I am wondering if I should expect any of these 2 pololu made devices to work with ev3dev / ev3 brick. I checked the pinout (they are simple 3,3V i2c devices) and it seems to match. I tried to u…
-
Rover-3.5 supports Balance Bots (aka segway like vehicles) but we could achieve better performance by adding support for [stepper motors like these from pololu.com](https://www.pololu.com/category/87/…
-
Thank for sharing the sketch -- it's very usefull;
I'm randomly getting a NaN values on pitch,roll,yaw vector when computing initial values. Repeting the procedure till all the values are not NaN sol…
-
Thank you!