-
*phr3ak:*
OpenWrt SNAPSHOT, r10368-17ae3eb9ff
Linux OpenWrt 4.14.131 #0 Sun Jun 30 08:16:08 2019 mips GNU/Linux
-
Using a Raspberry PI 3 and using the armv7-generic platform.
2 RTLSDR devices connected to a USB hub (powered)
I'm using the latest version 4.2.0 of rtl_airband.
Raspbian GNU/Linux 12 (bookworm)
…
-
Hi,
I tried two approaches to configure my TP-Link T4U AC1200 USB stick on Fedora 26 running
```
# uname -rvi
4.12.8-300.fc26.x86_64 #1 SMP Thu Aug 17 15:30:20 UTC 2017 x86_64
```
I tried doi…
-
After reports of many users that latest tnCartWonder bitstreams were not booting into their MSXs when using WonderTANG! V2.0b boards (and strangely my Panasonic FS-A1WSX and Toshiba HX-10 were not aff…
-
Dear Scateu:
The result of kal for my hackrf like this:
```
~$ kal -s GSM900 -g 40 -a 1 -l 62 -g 40
kal: Scanning for GSM-900 base stations.
GSM-900:
chan: 9 (936.8MHz + 9.492kHz) power: 47473…
-
(pwd)/caravel_analog/verilog/dv/mprj_por/ でmakeをそのまま実行するとエラーが出てくるため、解決方法を記します。
以下の手順を全て実行する必要があります。
・Install GCC
https://github.com/efabless/caravel_user_project_analog/blob/main/verilog/dv/READM…
-
If the RC failsafe is enabled and the vehicle is powered on before the transmitter the vehicle will enter an RC failsafe leading to the vehicle being switched to RTL mode even though it's still disarm…
-
I am trying to generate a design with 18 memory banks.
When executing the `make mcu-gen` it is not raised any error, next you can see the output.
~~~
$ make mcu-gen MEMORY_BANKS=18 MEMORY_BANKS_I…
-
Trying to collate some thoughts on what auto_rx would need from a multi-channel SDR server (think: SpyServer, but actually open source) into one place, instead of scattered across multiple issues.
…
-
I've noticed that when tuning, the reported value is 10kHz lower than the value I'm transmitting on with the radio.
My config is:
# DSP/RX settings
dsp_plugin="csdr"
fft_fps=9
fft_size=8192
samp_rat…