scateu kalibrate-hackrf issues

scateu / kalibrate-hackrf

kalibrate for hackrf

BSD 2-Clause "Simplified" License

262 stars 78 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

How can I use kalibrate-hackrf with RTL-SDR device?

#28 greyhat94 opened 1 year ago
2
./configure: line 5064: `PKG_CHECK_MODULES(FFTW3, fftw3 >= 3.0)'

#27 cslev opened 2 years ago
0
3G UMTS scan support

#26 Al3x4n opened 3 years ago
0
HackRF+Portapack+Havok firmware - kal -s not scanning

#25 infosecwriter opened 4 years ago
1
Wrong ARFCN and frequencies -- is `-E` needed?

#24 pbraun9 opened 4 years ago
0
No output from kalibrate-hackrf

#23 msfu101 opened 4 years ago
2
Scan freeze at first frequency

#22 andreoua closed 5 years ago
1
Is it possible to use this on windows 10

#21 ghost opened 5 years ago
1
No supported devices found.

#20 5l1v3r1 opened 6 years ago
2
kal -s GSM900 fail to find signal found by gr-gsm

#19 petterreinholdtsen opened 6 years ago
1
PCS 1900

#18 xietian1 opened 7 years ago
0
No package 'libhackrf' found

#17 canhu123 opened 7 years ago
2
Invalid ARFCN error

#16 silentkow opened 7 years ago
1
Running kalibrate causes gqrx to not work with hackrf one until system reboot.

#15 Scurge opened 8 years ago
1
Calibrating from narrowband PCS channels? (50 - 100 kHz, vs 200 kHz)

#14 rxseger opened 8 years ago
0
Support calibrating from 60 kHz WWVB time signal? (or 72 MHz Primex FM rebroadcasts)

#13 rxseger opened 8 years ago
2
Add documentation based on http://thre.at/kalibrate (2013)

#12 rxseger closed 8 years ago
0
c0_detect.cc:183:17: warning: absolute value function 'fabsf' given an argument of type 'double' but has parameter of type 'float' which may cause truncation of value [-Wabsolute-value]

#11 rxseger closed 8 years ago
0
Homebrew formula for kalibrate-hackrf

#10 rxseger opened 8 years ago
6
Merge kalibrate-hackrf with kalibrate-rtl? (add RTL-SDR support) and-or kalibrate-bladerf? / or use SDR abstraction layer (SoapySDR?)

#9 rxseger opened 8 years ago
3
Fix library not found for -lrt on OS X. Closes GH-7

#8 rxseger closed 8 years ago
0
ld: library not found for -lrt

#7 rxseger closed 8 years ago
0
Is it right (wildly inconsistent results on different channels, e.g. -33.570 ppm vs 38.369 ppm)

#6 dragonyzl opened 8 years ago
12
ld: library not found for -lrt

#5 gyaresu closed 8 years ago
3
No package 'libhackrf' found

#4 redwards510 closed 9 years ago
2
Add ability to specify channel when scanning to check power output for a single channel.

#3 xorrbit closed 9 years ago
1
Which HackRF Firmware?

#2 robotastic opened 9 years ago
3
Big cleanups

#1 ckuethe closed 9 years ago
0