-
Hi,
Using Arduino ide 2.2.1 and v1.1.4 of the library, the usb device is reinitialized about every 5 seconds on a Teensy 4.1, there are no issues with a Teensy 3.6.
The problem is fixed by changi…
-
Hi, I try to use Websockets with AsyncWebServer_Teensy41.
I don´t know the Problem is in QNEthernet.
Looking on the incoming Data with Wireshark i´ve see the OPCODE is not transfered how it should.
…
-
I have searched a lot over the internet but could not figure out the G-code syntax for touch off and saving that tool height in non-volatile memory just like work offsets. What are all queries related…
-
I am trying to build micro_ros_platformio for a Teensy4.1 but I get a lot of warnings from "ar" at the end of the build but no fatal error. Here is a picture of those warning.
Further in the bu…
-
Error on compile with fresh clone.
Windows 10 Pro 20H2 build 19042.1165
VSCode 1.60.0
PlatformIO IDE v2.3.3
Teensy 4 v4.12.0
Python v3.9.7:1016ef3
STR:
git clone --recurse-submodules https:…
-
Error on compiling using VSCode and PlatformIO
Cannot find file altpc.h
src\networking\httpd.c:104:24: fatal error: lwip/altcp.h: No such file or directory
Careful exploration of grblHAL folder…
-
I'm a college student working on a robotics project that requires interfacing with various sensors on a Teensy 4.1 connected by serial to a Raspberry Pi. Currently, we're using ROS2 Humble on the Pi a…
-
Working on RPi4 with teensy 4.1 on branch foxy, ROS Humble Ubuntu 22.04.
Calibration folder works fine, but uploading firmware following README yields errors:
```
atticus@rospi-ssh-session
~/gi…
-
The comment `# In led-blinker` in
```
# In led-blinker
fprime-gds -n --dictionary ./build-artifacts/teensy41/LedBlinker/dict/LedBlinkerTopologyAppDictionary.xml --comm-adapter uart --uart-device /d…
-
Hi Joe,
I'm trying your program to flash a hex file to my Teensy 4.0 using the SD card.
Having an issue, if you could help that would be really nice!
I've uploaded the hex file to the SD (led…