-
```
What steps will reproduce the problem?
Open EEPROM file (or new file) and go to general settings then trainer tab. Go
to RUD weight and set at 100% using arrows. Then click on THR and set to 100%…
-
```
What steps will reproduce the problem?
Open EEPROM file (or new file) and go to general settings then trainer tab. Go
to RUD weight and set at 100% using arrows. Then click on THR and set to 100%…
-
My twilio phone number is +14707983338 and public ip of aws is 107.20.81.14 .I am using Twilio's SIP Trunking service and have deployed the corresponding SIP service on an AWS server with port 5060. T…
-
According to the documentation of the [``](https://www.twilio.com/docs/voice/twiml/sip) element:
> The `region` parameter is not supported when calling SIP registered endpoints, the parameter will …
-
Hello, everyone.
I have purchased a FreePBX app in DigitalOcean. So I could access FreePBX admin panel and I got some endpoints.
Btw, I made a node server to test APIs and installed ari-client node …
-
Missing documentation about Ganesha NFS4.1 implementation for "Session Trunking" MUST support (see RFC 5661: 2.10.5)
-
Hello,
I am currently focused on implementing the SIP trunk. My goal is to redirect calls to a provider gateway, such as Vonage or SignalWire, in instances where the user doesn't answer a SIP call. …
-
Hi, I'm trying to implement in MMDVMHost the DMR tier III reverse channel commands for MS de-key and MS power control.
I use ok-dmrlib to generate the 32 bit PDUs, but the radios do not respond to th…
-
I’d like to have a desk where I can sit to work when there isn’t anyone in the dining room:
![IMG_7544](https://github.com/user-attachments/assets/314a7968-3b10-480e-b339-3c47d526f4f5)
I will ma…
-
The roll pin on the swim platform winch is designed to lock the drive shaft to the aluminium drum that drives the lifting rope. If this pin shears it needs to be be replaced using a 3mm pin punch.
…