-
**Describe the bug**
NEW SLZB-06, working fine on SMLIght Firmware, no network and Zigbee on XZG.
Board and zigbee are not detected properly (Unknown). I suspect a new rev with maybe a different pin…
w1zz4 updated
2 weeks ago
-
### The problem
I was able to update the firmare on the smart switches but when I went to update the firmware on the motion sensor, the first one seemed to work but now I'm not able to update the fir…
-
Can commands to join a Zigbee network be added to zigpy-cli to enable using NCP in ”router mode”? I believe that bellows CLI already have join commands for this? [Nerivec](https://github.com/Nerivec) …
-
### Question
All of these functions in End Device or Router is not working when send to gateway. But Gateway to End Devices are working Ok.
All functions are listed down
esp_zb_zcl_on…
-
Hello,
I got same French valves by Thaleos-Connect, I have following definition :
```js
const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE200_rv6iuyxb',
…
-
### The problem
I've just bought a Sonoff Zigbee 3.0 dongle and I'm attempting to migrate to Zigbee Home Automation and it's a relief to get away from deconz and phoscon. The setup process has been…
-
### Link
https://vi.aliexpress.com/item/1005006200978325.html?spm=a2g0o.productlist.main.21.322eAnWZAnWZWR&algo_pvid=3a64275f-3231-410c-a5d4-5d38a082b179&algo_exp_id=3a64275f-3231-410c-a5d4-5d38a082b…
-
Мне в голову пришла идея:
Можно ли эмулировать _ZigBee_ или _Matter_ устройства через HA и подключить их к колонке с Алисой?
Получится ли при это реализовать локальное управление умным домом с Алисо…
-
Hi all,
Really perplexed by this situation. Trying to add a couple of new devices to an old network (running since 2020). Aqara WS-K01D and ZNQBKG45LM show as supported but trying to pair them thro…
-
Device: Osram Smart+ Plug
Connection via Z2M
### Checklist
- [ x] I checked for similar existing issues (both open and closed) before posting.
- [ v0.0.0] I am running the latest version.
…