-
Good day!
I would like to monitor multiple Altherma units connected to the same HA and MQTT broker.
Unfortunately, the current code hardcodes all MCUs connect to the same topic.
I would like t…
-
For some reason, my Daikin system seems to get allocated a new IP address on my network every now and then (typically lasts a few weeks). When this happens, the sensors become unavailable, and after a…
-
Hi, is it possible to integrate the "Powerful" (leistungsstark) button from the Onecta app into Home Assistant so that you could activate the water heating directly from Home Assistant?
-
have installed a daikin brp069a62 on to a daikin altherma monblock system with a room thermostat
unit comes on line and is seen by home assistant
but only the Hot water cylinder is seen and all…
-
I was wondering, can the presented module work without a Daikin control module attached to the P1P2 port? I have an Altherma 3 without central module but with external thermostat that just gives an on…
-
Good morning,
Using Daikin multi split perfera at home.
With the last version, when selecting another fan speed or powerful mode, nothing happen on the A2A split.
If changing the fan speed mode …
-
There is a problem with the Hot water target temperature for me. When i try to set a new target temperature, the integration sends it to the heat pump; but the value in the integration switches back t…
-
Configuration file:
[config_entry-daikin_residential_altherma-2d7d5b56ffd7de32b7ce575dd4729bb7.json](https://github.com/speleolontra/daikin_residential_altherma/files/14627563/config_entry-daikin_r…
-
Hallo, ich nutze WaveShare Esp32-S3 sowie Waveshare SN65HVD230 CAN Board an einer daikin altherma 3 R ECH2O (EHSX08P50DA3).
Die Einstellung für Warmwasser Soll bezieht sich ja auf die Temperatur de…
-
### The problem
I am using overkiz to get data from the somfy tahoma box. On the tahoma I have added daikin as integration, where I have 4AC units but also a Daikin Altherma 3 which is a heat pump wi…