-
Hi bitluni,
i love this project! I build a 17*8 matrix and it works very good, but your lighteffect has some "magic numbers" and i don't figure out how to get it right ....
i have a zigzag setup…
veitk updated
4 years ago
-
Thanks for the project. It compiles and loads on the board.
But I'm not able to change the Time-Lapse interval using the web interface. no idea what happens but a picture is still taken every second …
-
I'm trying to compile the VGAHelloWorld example, but every time I try to upload it, the Arduino IDE just fails.
I'm using Arduino IDE 1.8.10
`In file included from c:\users\varga\documents\arduino…
-
Pulled master of today. Compiling yields into an error:
camera.h:2:24: error: esp_camera.h: No such file or directory
#include "esp_camera.h"
What am I missing here? A library?
-
It is impossible to create new capabilities and supporting libraries for them without fully documenting the hardware subsystems like the DMA, SPI, UART peripherals with bit level documentations.
Th…
-
I've two ESP32's (30pin) that look physically identical, both use DOIT ESP32 DEVKIT1 board to program. However on one board the vertical height appears different on the TV, with it being expanded so t…
-
Does this work on an Arduino ESP32?
-
Hi,
I am using an AZ-Delivery ESP32 DevkitC (ESP-WROOM-32) and tried out the 14Bit VGA.
The examples VGADemo14Bit, VGASprites and VGA3DEngine are working well so far, but when i try to set a higher …
-
If it is possible I would like to have a simple demo regarding just drawing a few random dots or lines in the loop.
The point is to clearly understand the way it is supposed to be done this.
As si…
-
Hi.
I am using esp32lib in a ZX spectrum emulator (https://github.com/rampa069/ZX-ESPectrum) and it works fine in 3 and 14 bits. but when in 6 bits (dont need the 14 bits and RAM memory is a …