-
Hello!
'Ringing' (wavy surface pattern) is a common problem when attempting higher printing speeds; vibration compensation has been brought up here before, but this approach seems new, and I believ…
-
Probing a mesh or Screws_Tilt_Calculate are no longer accurate. Several others are having this issue. With no mesh I can print a 150x150 first layer test perfectly, but screw tilt says I need to make …
-
## Test setup:
- SAV MkI
- SAV 3D LCD
- CoreXY mechanics
- Inductive sensor + Autobed leveling
- SD Card
- Host interface: CURA
## Status:
- Outbid leveling - **PASS/FAIL** (with observation)
- Therma…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I try to enable SENSORLESS_PROBING in a corexy auto build 3d printer.
SENSORLESS_HOMING is w…
-
### Version
_Version of SupserSlicer used goes here_
Latest code from github, 9 September, 2020
_Use `About->About SuperSlicer` for release versions_
_For -dev versions, use `git describe --tag`…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I was trying to use the Auto Bed Leveling: BILINEAR, but it makes error after doing a G29. G2…
-
### Version
_Version of SupserSlicer used goes here_
2.2.52
_Use `About->About SuperSlicer` for release versions_
_For -dev versions, use `git describe --tag` or get the hash value for the versi…
-
Firstly, I apologise if this is the wrong forum to post this type of question on. If so, please feel free to direct me to the correct location.
I have a CoreXY with 300 x 300 aluminium bed & inductive…
-
I was using the RC6 is I reported the configuration RC7. But I have a problem with the z and x axis, while the y-axis working properly.
It seems a problem because endstop autohome the axes do not mov…
-
Hello, everybody. I have an issue with auto bed level configuration for my CoreXY 3D printer.
(RCBugFix branch)
My brief settings are (full config attached):
```
#define X_HOME_DIR -1
#define Y_HOME_…