-
I found that when the ECU is connected using socketcan, subscribers to the ECU do get notified when CAN bus messages are received but when pcan is used for the connection the subscribers do not get no…
-
Project uses odxtools to de-/encode of UDS-Messages. The following issue occures with odxtools v 6.7.1 and RFAIO 0.11.4:
```File "C:\RobotFramework\python39\lib\site-packages\odxtools\load_pdx_file…
-
-
State to flash our ECUs with tested firmware
-
Hello;
Not an issue at all, but I came across your github while looking for info about the Triumph canbus.
I have the clocks removed and are away from my bike (Tiger 1050) so I cannot sniff the …
-
Output of fw script with --scan option:
```
Found FW versions
{
(Ecu.unknown, 0x71f, None): [b'\xf1\xa0A']
(Ecu.unknown, 0x728, None): [b'\xf1\xa0\x02']
(Ecu.unknown, 0x725, None): [b'\x…
-
### Background
Secondary ECUs report, in their ECU Manifests, various data to the vehicle's Primary ECU and ultimately to the Director. This includes what is installed on the ECU, what the ECU's offi…
awwad updated
7 years ago
-
From my research so far I have seen you need a bootloader to change ECU code or maps. My ECU is from a Volvo S60 2005, they use CAN communication though using a J2534 device or ISO15765.
Anyway, in…
-
Hi @EA2EGA,
thanks for coding and designing this awesome tool.
Do you know if the code will work with all TD5 ECUs or is there a limitation based on the year of manufacture?
As I can remember, al…
-
Hello Xavier,
First of all, congratulatios for this projet.
I already did some tests on your code a while ago with an arduino, but I was having problems with the ECU connection. I could received…