-
If you use the MQTT option and configure it under "Advanced->OTGW Settings" the prefix box can have a better description.
Now the item is called `MQTT Home Assistant prefix`.
![MQTT prefix](https:…
-
Hi Rob,
I was trying to get some OTGW info (flame status, dhwmode, chmode, faultindicator etc.) into my domoticz using the REST GET API provided by your OTGW-firmware. I wanted to do this by proces…
-
Hej,
have you ever considered to add a local temp-sensor readout to the firmware, using one of the unused ESP pins? With the one-wire sensors one pin can serve several sensors. Using this would req…
-
Wondering if it would be possible in this firmware to add support so that thermostats that ignore msg9 remote override and get the firmware to step in as many seem not to support it.
My thoughts:
…
-
Hi,
I think it would be useful to expand the README.md and add some info comparing this firmware and its capabilities to alternatives. So far I have found the following:
A library to interface …
-
Both OTMonitor (OEM Fault code) as the display of my CV Heater show code 105.
Webinterface of OTGW shows:
OEM Diagnostic code: 126
OEM Fault code: true
Is this expected behavior?
-
Hi all,
could someone please share the config with me? I really dont know what config to use here, i started the container and it didnt create the *.conf file.
Thank you.
-
Currently, the gateway / boiler operates based on demand from the indoor temperature sensor/thermostat. However, I would like to request the addition of an option that allows the boiler to be blocked …
-
Since updating to 0.10.0 the hostname I configure in settings is not actually used, it seems to be "esp-" with the last few digits of the MAC address added.
I have tried resetting all settings to d…
-
FYI.
When flashing new Wemos D1 mini with version 21 (OTGW-firmware.0.9.5+4eb7d24.ino.bin) the wif settings page is empty when Wemos restarts in AP mode.
As work around i flashed the wemos with…