-
### Describe the bug
An issue in px4 Holybro 6x (fmu-v6x) which causes the COM ports to disappear after successful flashing of the firmware. Hence not able to communicate with the drone after flash…
-
**Expected Behavior**
Vehicle responsive to joystick axes commands
**Current Behavior**
After calibrating and enabling the joystick, the QGC only recognize and send the joystick's button commands…
-
## Expected Behavior
Autopilot should be connected via usb successfully.
## Current Behavior
We can not connect to qgc from usb. This problem only occurs with usb connection. It connects suc…
feemi updated
4 years ago
-
## Bug report
After a flight of about 3 minutes I get this message 'Internal error 0x1000000'
Both in manual flight and automatic flight The flight controller is a cube blue with an AUTOPILOT boa…
-
I'm writing a offboard controller in c++. It's based on examples found in the px4_ros_com repository. The program can fly a quadcopter perfectly fine in simulator (gazebo + QGroundControl). But on rea…
-
Hello, is possible combine your examples for swarm and PX4 using Gazebo-Classic?
There is any done example to do this? (Maybe with BT)
-
On my Taranis, I'm only receiving audio alerts from the MAVLink data, such as prearm warnings, and flight mode changes. Voltage, current, heading, GPS and other telemetry do not display on the screen…
k5njm updated
9 years ago
-
### Contact Details
Aadil Memon
### Past Projects
https://drive.google.com/file/d/1mROUAOVDXgwDDjWi4A_SLO010igYVN5d/view?usp=drive_link
### Which disaster risk or issue are you addressing?
Probl…
-
### Describe the bug
As per [Multicopter PID Tuning Guide (Manual/Advanced)](https://docs.px4.io/main/en/config_mc/pid_tuning_guide_multicopter.html) i was trying to set pid controller to use Standar…
-
**Describe the bug**
My plane is skylark, as shown below.
it's a classical plane, which has aileron, elevator and rudder.
My FC is Pixhawk 4 mini, which has no AUX-output.
after flash the fi…