-
My current ESP32 can run LVGL code normally, but the serial port cannot print properly. It only automatically prints the following:
ESP-ROM:esp32s3-20210327
Build: Mar 27 2021
rst:0x1 (POWERON), …
-
### Board
Wareshare ESP32-S3-Touch-LCD-7
### Device Description
Wareshare ESP32-S3-Touch-LCD-7 with ESP32-S3-WROOM-1-N8R8 on board.
![image](https://github.com/espressif/arduino-esp32/assets/81597…
-
I recently moved from Square Line Studio to EEZ Studio everything is the same but different.
I use the waveshare ESP32 S3 Development board https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-4.3
…
-
I've just compiled & installed this build -- works flawlessly, but doesn't show call history. Is it not part of the app?
-
Hi,
First of all a big thank you for your great effort in releasing the pi4j v2 library, you did an amazing job.
I'd like to use the MCP23017 as a GPIO provider, but the codes you posted as exam…
-
vee_nits123@Veenits-Air ~ % cd valhalla
vee_nits123@Veenits-Air valhalla % **cmake -B build -DCMAKE_BUILD_TYPE=Release**
```
-- The CXX compiler identification is AppleClang 14.0.0.14000029
-- Th…
-
Hello,
thanks for your great work.
I just got some mechanical keyboard PCBs (designed by Adam Eberbach [(aerberbach here on github](https://github.com/aeberbach/A600KB)) for the A600 from pcbway…
-
Hello!
Some times my application was very slow, and I noted that problem could be the write file slowing down the entire application. So I did a very simple example just writing file to demonstrate…
-
Hi,
For a future version, it would be better if you could swap the Vcc (3.3V) and GND on the pins row:
```
[... | 15 | 14 | Gnd | Gnd ]
[... | 04 | 02 | 3.3V| 3.3V]
```
to this instead
```
…
-
The Pi Pico has 2 physical cores, but only one core is usable in CircuitPython. Micropython has limited multicore functionality when used with the pico, allowing the user to start a separate task whil…