-
Hi,
I have had a couple of gear prints that fail get bad print results when using OcotPrint. The same gcode in repetier via a pc works perfectly without any small stops or hesitations in the movement…
-
This happens at least with repetier firmware in slice3r 1.2.9
In eeprom I can set a maximum extrusion speed (something like 2mm/s on 3mm abs on my K8200)
Retraction speed is set at 40mm/s, but it will…
-
**Right Now I have use your X-scara firmware.I know how to set INVERT my motor but I confuse what is the correct direction.I test on Pronterface and Repetier-Host.My Question is**
![move_in_position]…
-
I've successfully programmed my gen 7 board as shown on the wiki, but now when I try to connect from repetier host I get no response, but a communication timeout... I'm not sure what to do. I can't ge…
-
### Issue description
I'm using MK4.3.9 dev on a gt2560. My problem is that from lcd I can't see gcode files on the sd card, but I have no problem to see them from repetier-host.
### Firmware vers…
eavoc updated
5 years ago
-
I am trying to connect to my 3d printer on linux. I am talking about a turrnigy fabrikator 2 mini that I got second hand from someone. I can have successfully connected to it from repetier host on win…
-
During printing of a doodle the printer suddenly chooses a travel path to the boundary of the bed. Sometimes a straight line in X direction and sometimes in Y direction.
It then also doesn't respect t…
-
Hello, you can upload new trams-marlin? In this branch when i click home x (in repetier host) my axis z come down. and printer does not respond to movement commands.
Or maybe you will give some advic…
-
hello i'm a mechanic of truck not a programmer.
I have flashed a ARDUiNO DUE with repetier firmware v092.
I have a problem with the displayed temperature from repetier host ecc.
In the file Configura…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
the progress bar is blocked on 0%.
### Bug Timeline
_No response_
### Expected behavior
_…