-
The Arduino example program prints at start:
...
Starting stream server on port: '81'
...
After starting capturing I tried to get the stream on port 81 in a browser. It waits for data, but can't …
-
I´m trying to install it on a RaspberryPi Zero W but Make get stuck on:
g++ -o LoRaPktFwrd RadioLib/src/linux-workarounds/SPI/SPI.cpp RadioLib/src/linux-workarounds/dummy.cpp RadioLib/src/protocols…
-
**Description**
While configuring EBYTE E22-400M30S board with SX1268 chip to work in FSK mode saw that using setTCXO() method doesn't affect on DIO3 pin of SX1268 chip.
**To Reproduce**
Just tr…
-
the new LLCC68 based Lora
Module is out, is it possible to add the support in the coming release?
thx
**IMPORTANT: Check the wiki**
Before submitting new issue, please check the [Wiki](https://githu…
-
### Description of defect
The SX126X driver makes use of device, frequency and crystal select pins. These are present in the EVB but not in any target using a SX126X module directly. Ther…
-
Not sure if this is me, I cloned your repository and before I make any adjustments (my pins are different [M0=22, M1=27 for the E22 based waveshare SX126x based LoRa hats.
SX1268_433M_LoRa_HAT `https…
-
After radio.init called, we called the radio.rx(0xffffff) for into the rx mode , but when I test it ,I found the switching time is 10ms.
the code like this:
tick1 = HAL_Gettick();
Radio.Rx(0x…
-
Hi i'm trying tu use this library with waveshare lora hat (https://www.waveshare.com/wiki/SX1268_433M_LoRa_HAT) based on sx1268 chip but unfortunately Pi does not recognize it - i've changed ic_model:…
-
Hi,
I have an ebyte e22-400t30d module. This module is based on sx1268 chip and has uart interface. It's easy to program, but there is no access to the sx1268 chip settings. I want to establish commu…
-
Hi, Jan,
It's seems we've found issue with PayloadLength in FSK mode at SX1268. Please see details below.
**Describe the bug**
It's impossible to receive packets after any transmit.
**Actual…
eg321 updated
3 years ago