-
The MMU produces quite a hissing sound while idle.
The stepper drivers should enter a reduced power mode while not moving.
-
I have updated the version of GRBLHal that I was using since January 15 and when updating to the current version my motors have started to make a noise, I am using the same amperage configuration for …
-
## Feature request
**Problem**
_I see a lot of people specially in the HD FPV community who avoid ArduPilot AntennaTracker, because they like to build smaller tracker setups. They basically reques…
-
Hello, you can upload new trams-marlin? In this branch when i click home x (in repetier host) my axis z come down. and printer does not respond to movement commands.
Or maybe you will give some advic…
-
Hi, first of all sorry, i usually code in python, this is a little new to me.
I have the issue that i want to drive a stepper with a rather high speed (200RPM) and change the speed acording to an Ana…
-
Would it be possible to increase the image resolution (Quality) to 50 lines/mm?
I am currently using a laser which has a spot size that can be adjusted down to about 20-micron diameter. Thus having 5…
-
I'm getting the seventeen build errors listed below. Trying to build for a BTT SKR 1.4 Turbo with four TMC2130's. If I comment out the #define TRINAMIC_ENABLE 2130 in my_machine.h it builds just fin…
-
The line ``steps = 17 * 200 * STEPSIZE; `` in ``void loadFilament(int direction)`` results in about 54k, which gives an signed integer overflow.
Adding ``ul`` specifiers (for unsigned long) fixes …
-
Hello Henry,
do you build a working controller? Is there a pcb-layout available?
Many thanks for your answer
Hans
-