-
### Board
ESP32S3
### Device Description
Board drawn by myself using ESP32S3 FN8 chip
### Hardware Configuration
InlineCurrentSense current_sense = InlineCurrentSense((float)0.01, (float)20, (int…
-
**Is your feature request related to this issue? Please describe. **
How to add support for new sensors?
**Describe your desired solution**
I don't know how to add TLE5012B MagneticSensor.
-
Part 2 of this issue, continued from here: https://github.com/arduino/ArduinoCore-renesas/issues/139
Please lets keep it to the relevant parts for the issue, and have any conversation around it her…
-
There are two bugs here, with regards to the SAMD/E implementation.
First of, the CCBUF, should not be fed with the channel number, but the wo association. I think, correct me if im wrong?
[Edi…
-
I am trying to run a stepper motor. I initially setup a magnetic sensor. But switch to open loop as a first test, and It runs ok with a velocity of 20 to 80. But still, lower speeds are erratic. I did…
-
I try to initialize AS5047A on a RP2040, default SPI port with Cs on 22 pin. No success.
`
> #include
> #include
> #include
> #include
> #include
>
> #define SENSOR1_CS 22 // some d…
-
Hi,
A user came across something weird when testing on a gd32 board.
A change in one of my last commit is making the main loop much slower, impacting motor control.
It seems the reason for the …
-
I started working on support for Cortex-M4 core (CPU2) in STM32H7.
I'm opening this issue to track progress and not duplicate work if someone else is working on it.
My target board for now is nuc…
-
Not a major issue as you've said you've got several others on the way for testing, but the link to the motor you used is now out of stock: [AliExpress](https://www.aliexpress.com/item/1005001384349991…
-
> In my case data was sent every 10ms, that could lead to the issue. Unfortunately I had to travel abroad this morning so I can't test next few days.
@Candas1 i can even send from ESP to GD every 5…