-
type 0x18 sensor seems to be the only weatherhub that support barometric air pressure. The display shows air pressure in HPa, temperature and humidity.
According to MobileAllerts gateway inary uplo…
-
Good afternoon, I ask for help. how to calibrate height on dji mini 2 or how you can link barometer readings to lower sensors. Is there a python command or calibration that solves this problem? Or a h…
-
I followed the document to tried the motor arming.
[Http://ardupilot.org/copter/docs/arming_the_motors.html](url)
However, it did not work and I tried it by pressing the 'ARM' button on the 'ACTOINS…
KimEJ updated
5 years ago
-
I have been upgrading a boat from a Omnibusf4pro to a Matek H743 Wlite. but I have ran into an issue with the i2c bus where setting an address of 0x70 on my sr04 sonar adapter (default for maxbotix i2…
-
The barometer entry in the KLN-89 trainer has the following range for barometer entries:
22.00-32.99 inHg
745-1117 hpa
Check if this is correctly implemented in our simulation.
-
**Version and Platform (required):**
- Binary Ninja Version: 3.5.4286-dev, 58311b01
- OS: macos
- OS Version: 13.3
- CPU Architecture: arm64
I would like to change `0x2004a7a8`, `0x2004a698`, `…
-
Commands to add:
- [x] Ground power bus
- [x] Engine & APU bus
- [x] Logo light
- [x] Position light
- [x] Beacon light
- [x] Wing light
- [x] Wheel light
- [x] Fuel pumps
- [x] Transponde…
-
I noticed https://github.com/oetiker/RrdGraphJS/pull/2
I am new to rrdtool. The code in it's current state is missing an example backend to generate the graphs which is a shame. I hope you add an exa…
-
Awesome job.
Would it be possible to add a UV icon along similar lines to the icons for humidity, barometer, etc? Icons to represent different UV levels (low, medium, high, etc) or uv indexes (a tria…
-
This is an improved version of #48:
* added real air-pressure timeseries on top for comparison.
* we only consider 1 barometer instead of location which can have multiple barometers.
* we truncat…