-
- please translate the following
- [ ] reason for referral- Sababu ya rufaa
- [ ] voluntary medical male circumcision- Tohara kwa wanaume
- [ ] other reason-Sababu nyingine
- [ ] choose referral faci…
-
Since we switched to _entity instantiation_ (in https://github.com/stnolting/neorv32-setups/pull/103) we have some problems with the open-source synthesis flow:
## 1 - The "Minimal" configuration f…
-
Hello everyone!
I am try to use CFU-Playground to load a minimal `Vexriscv` CPU added of a CFU because the FOMU board does not have resoucers enough to synthesize the full version of `Vexriscv`. Th…
-
Hello everyone!
I am working with `litex/CFU-Playground` tools and to flash a CPU like `Vexriscv` I need to acess the board by `/dev/ttyUSB0`, `/dev/ttyUSB1` or `/dev/ttyACM0` if possible.
When …
-
I am trying use the fomu PVT board version in a virtual machine. When I put it in USB port the Windows OS recognize it correctly, as you can see below:
But, when I try to attach the board to virt…
-
Bug type: Language Service
**Describe the bug**
- OS and Version: Windows 10
- VS Code Version: 1.64.2
- C/C++ Extension Version: v1.8.4
Under directory hw/bsp, there is 63 sub-directory, i n…
-
We have discussed in several issues about adding a USB-UART peripheral to NEORV32 (either internal o external), which would allow to communicate the NEORV32 with a host laptop/workstation when using b…
-
### Zig Version
0.10.0
### Steps to Reproduce and Observed Behavior
I have a GPIO blink program written for the RPI zero/A+ which I know successfully blinks the light. Due to this being a bare meta…
-
When I run `python3 ./betrusted_soc.py` on my machine I get this error:
`INFO:SoCIRQHandler:usbdev IRQ added at Location 19.
Traceback (most recent call last):
File "./betrusted_soc.py", line …
-
The boards don't have a FTDI chip, so it is necessary to have a bootloader. TinyFPGA has one, FOMU has a DFU based one.