-
Hey guys, I'd like to use my arduino for milling (which I already do with GRBL) and at the same time to laserplot (to engrave wood or exposure photosentitive PCBs). I wonder if GRBL/Lasaur would be su…
-
It may be easier to solder to the milled board if it is treated with a thin coat of plumbers tin BEFORE it is milled. We tried this step after milling and it created a conductive path across isolatio…
-
Currently each `Task` (or `TaskGenerator`) contains a list of resource names it requires. These are then picked up by the `Scheduler` using `Task.taskResources` and the `resourceMap` provided by the `…
-
Hello!
PCB milling requires using height map of pcb, because copper layer has the same thickness as height irregularities. It would be useful to read pre-measured height map for gcode generation
…
-
The following capabilities should be included as possibilities, and we should be able to search for spaces based off of these capabilities.
Metalshop
Woodshop
Sewing
Laser Cutting
CNC milling
3D…
-
Not a high necessary or urgent feature but an adaptive milling pocketing pattern would be cool. http://cadcamlessons.com/2d-adaptive-clearing-fusion-360/
For me the V-carve and wooden inlay feature…
-
Hi,
This is an amazing project. I'm trying to implement this project for my proxxon milling machine. Could anyone please share the circuit diagram for "LCD" and "Push buttons" with me?
Best rega…
-
https://github.com/Traumflug/Teacup_Firmware/commit/8d04794
Just has the issue that I can't set up my endstop properly. The enstops are NC and connected to GND.
-
sorry,after much searching I did not find a solution.
I use this controller for a milling and a CO2 laser machine
When i make many changes in power laser (S) the XY movements go slow
The power dont…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Discussion
https://forum.freecadweb.org/viewtopic.php?f=15&t=71436
### Version
0.20 (Release)
#…