-
In QGC, NAV_DLL_ACT has several value option: loiter, RTL, land at current position. But modules/commander/commander.cpp only care about if NAV_DLL_ACT(datalink_loss_enabled) > 0
And NAV_DLL_ACT do n…
-
### Describe the bug
The barometer value is increasing/drifting while simply sitting on a bench. This leads to drastically inaccurate altitude readings. For instance, when monitoring the sensors tab …
-
@julienmctighe found this project:
- [`genericairplanemodel` (GitLab)](https://gitlab.com/m6029/genericairplanemodel)
which might be useful to (at least some sub-part) of our project.
-
This page is for anyone to report an Internal Error ("Internal Error:" in GCS or DataFlash messages). This allows the Dev team to be alerted, and to investigate as soon as possible.
Please enter th…
-
When I compile master or [stable v3.3](https://github.com/mavlink/qgroundcontrol/tree/St…
-
When the SkyShield is powered only by USB, the servos do not respond correctly to instructions in the sketch. The servos work as expected when plugged into the battery pack (fresh alkaline AAA) and wo…
-
### Describe the bug
Unable to update the stock firmware to BF 4.5.1
### To Reproduce
Enter DFU mode.
Choose board.
Load Firmware [Online]
### Expected behavior
Flash firmware.
### Support ID
…
-
As for the present release v1.10.0, tailsitter simulation which is gazebo_tailsitter is based on 4 rotor tailsitter. If this could be extended to a dual rotor platform with elevons, it could be usef…
-
Orbus-7S is an obscure solid kickstage motor which IMO would be really cool to have in BDB.
it is basically an Minuteman III/Minotaur II+ 3rd stage (aka SR-73) but with the gimbal equipment removed…
-
Hello. Thanks for your work! In no-fly zones, the drone can fly, checked.
Already 2 times successfully installed the super patch, and when flying anywhere the same problem arises. Sometimes, for no…