-
----------------------------------------------------------------------------------------------------
| Required Info | …
-
Can any one help us how to wiring the Arucam OV2640 with the UNO board, and what libraied we need to download ( step by step) because our team tried to wiring may ways, downloads alot libraries that p…
-
Hello Team ArduCAM, thanks for the great work that you are doing.
I tried to get Arducam mini 2MP camera working with nodemcu. I connected the arducam and sd card through SPI and used the following c…
-
Hi,
I have set up Arducam Shield Mini 5MP Plus with Beaglebone Black Rev C. I am able to read/write Arducam registers through SPI and I2C. I have gone through OV5642 datasheet and SW application note…
-
Hello,
the following link suggests that for **Camera Module v1**, the framerates drop as the resolution increases:
https://www.raspberrypi.org/documentation/hardware/camera/README.md
at 1080p, …
-
Flex Ads Demo 를 위해서, 일정한 높이에 카메라가 있어야 정확한 인식이 가능하다
이를 위해서 물리적으로 카메라를 바닥에서 1.7~1.8m 위치에 있도록 설치해야 한다.
대표적인 방법으로, 삼각대를 이용하여 TX2 를 설치할 수 있으며
이 때 TX2 를 통째로 올려놓거나, Camera 의 extension cable 을 이용하여 C…
-
Hi,
In the sfm code, there is a operation of normalizing the feature positions, but I don't want normalize it, what should I change of the code of sfm part?
Thanks.
-
Running on a Pi 0 W V1.1, but the camera won't connect.
The camera works when I connect it directly to the Pi 0 W, it works fine:
[ 23.968383] googlevisionbonnet spi0.0: Initializing
[ 24.4…
-
Is it possible to use the vision board with a different camera?
I know the V1 is not supported, but is it possible to create a generic driver for the vision bonnet? I would like to use a 360 camera.
-
Just got a 5MP Mini RevB and I'm trying to at least get a picture on an SD card using a Arduino UNO.
When the Arduino starts I get:
```
ArduCAM Start!
OV5642 detected
SD Card detected!
Start Capture…