-
As a muon scientist I want to be able to monitor and control the HIFI Magnets (there are 4).
#### Acceptance Criteria
1. Using the IBEX client, I can monitor and control the HIFI Magnets
- [ ] An…
-
### Describe the bug
I opened a terminal and type the command"PX4_SYS_AUTOSTART=4001 PX4_SIM_MODEL=gz_x500 ./build/px4_sitl_default/bin/px4 -i 1" to create a new UAV named"px4_1", open the UDP and QG…
-
For the drone to stay in offboard mode, setpoint messages must be sent at least 2hz. Currently when more than one vehicle is on the network, the setpoint frequency can drop below 2hz. Dropping below 2…
-
User on https://unmethours.com/question/100084/cannot-run-unmet-load-hours-troubleshooting-measure/
AirLoopHVAC does not have a setpoint manager on the supply outlet node, so it crashes here:
ht…
-
### Link
no link, Model Mazda : MZVT1Z
### Database entry
{"id":2,"type":"EndDevice","ieeeAddr":"0xa4c13825699aa549","nwkAddr":1643,"manufId":4417,"manufName":"_TZE204_k6rdmisz","powerSource":"Batt…
-
## Todo
- [x] Add the setting to hub4control
- [ ] Add the setting to gui-v1
- [ ] Add the setting to gui-v2
## Background
In a system with both a Multi/Quattro and PV inverters, and wher…
-
On my Buderus WLW186 heatpump with ems-esp 3.7.0-dev.30 I use successful the dhw mode to select between the different dhw modes (eco, eco+, comfort, off and auto). But, when I select the auto mode (ti…
-
I am trying panther on Ubuntu 18.04 and ros-melodic
I've completed procedure to build and install panther and it's dependencies.
I proceeds to run: `roslaunch panther simulation.launch quad:=SQ01s`
…
-
Hi,
I'm wondering if the integration applies a fixed calculated setpoint or recalculates the temperature difference between the zones and the controller periodically to change to an optimal setpoin…
-
Hi, I'm not sure if this is expected behavior but when I try running the PID controller with different inputs at each call it outputs the same value every time regardless of what gains I choose
for…