-
We need a thermal simulation that can handle different materials for heat simulations. We can assume density of these materials are uniform.
- [ ] Heat source (from a resistor or burning fuel, for …
-
If we put the MCP9800 close enough to the thermocouple contacts (https://github.com/PaxInstruments/t100-electronics/issues/42), we may be able to use thermal epoxy to give better thermal contact.
-
My Surface Pro 7 has erratic thermal throttling behavior under Linux. The CPU will run fine at roughly 2.4GHz for a while when pushed. But will drop to a mere 200MHz. After it cools down a bit it will…
-
### Description
The model `IDEAS.Buildings.Examples.ZoneExample` does not simulate using OM while it does seem to be a valid model. This model worked in the past and we narrowed it down to a change…
-
For the unification in this modpack, I suggest that the same seeds from different mods merge. For example, we have 3 different rice seeds (sushi go crafting, thermal cultivation, croptopia) and 3 diff…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When starting a print job, the hot end heats up well beyond the target temperature setting be…
-
```
Recently a modification of the DDA for thermal near-field transfer has been
proposed - http://dx.doi.org/10.1016/j.jqsrt.2013.08.021 . The overall theory
seems rigorous and straightforward. The …
-
Description:
EM, thermal, electrophysiological, and damage modeling: Determination of the following Quantities-of-Interest (QoIs): averaged current density and field strength according to the relevan…
-
Part of the new Power / Thermal
-
@nsedayilmaz and I have been comparing the MSRE reference CSG model from IRPhEP (originally a Serpent model that we've converted to OpenMC) to the CAD model here and one thing we've found that seems t…