-
Design a circuit that will allow the ESP32 MCU to control the power up sequence of the servo motor controller. The steps in the power-up sequence will (roughly) 1. ESP32 does boot up process, 2. Provi…
-
I've read many articles about this thing being tooo sensitive.
I've rigged it with an esp8266 chip, from my observation, if way less sensitive the I expected it to be.
Is it normal for this board to…
-
See error message below:
```shell
(knime) PS C:\Workspace\python_projects\FAReviews> python .\graph_creation3.py
Please provide the file path (csv) for the input data (reviews): C:\Workspace\pyth…
-
### Description
The compose parser in `/cli/compose/loader/` does not follow the compose 3.4+ schema rules as they apply to volumes that are `external` and also declare `driver`, `driver_opts`, `la…
-
Hello!
We're working on a study related brain rhythms and speech.
We are collecting EEG data with Brain Products BrainAmps Hardware and audio through a USB microphone. For the EEG, we are using …
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
ublox GPS reports…
-
### Description of the problem
> I have a NAS DS218play on DSM 7.2.1-69057 Update 5 and I installed the driver r8152-rtd1296-2.18.1-1_7.2.spk. The new LAN shows up as 2500 Mbps, Full duplex, MTU 15…
-
Opening this issue on behalf of community user in [this post]( https://community.grafana.com/t/grafana-8-alerts-error-input-data-must-be-a-wide-series-but-got-type-long/64169)
What Grafana version …
-
Hello,
I got a psr-18 error when I test your example:
No PSR-18 clients found. Make sure to install a package providing "psr/http-client-implementation". Example: "php-http/guzzle6-adapter".
``…
-
The Seagate GoFlex Home we've been using has been discontinued. We badly need to migrate to another NAS that can run Debian. We need to standardize so we can start pumping out units on demand.
This…