-
Hi. This is my first comment. I'm not sure if I'm posting in the right place. I apologize in advance if I'm making a mistake.
When I run below code (or any code with pythermalcomfort)
```
from py…
-
This includes work on the part of @ayezioro in that the upper and lower temperature limits of the comfort polygon can be determined with the current PMV function in LB_LB. It also includes @chriswma…
-
Request a data element: `Chiller.minimum_unload_ratio`
Description:
`The ratio of current load to available capacity at a given simulation time step. Used only when this value is higher than the…
-
We are getting Low Cooling DSE: 0.02836323 while running one building (NREL\Team OCHRE - Validation\OS-HPXML_1.7\test_100\buildings\up00\bldg0000001) using os-hpxml-1.7branch. The building is located …
-
Helpdesk ticket 10340
*\* Severe *\* Autosizing of Source side water heater design flow rate requires Sizing:Plant object to have an exit temperature >= 58C
*\* ~~~ *\* Occurs for WaterHeater:Mixed ob…
-
Issue overview
--------------
ASHRAE Standard 90.1 baseline buildings uses F-factor method to present slab-on-grade floor construction. This makes EnergyPlus's FC-Factor Method still relevant despit…
-
BPI-2400 lists maximum U-factors for "Single-pane window, wood frame"=0.714 and
"Single-pane window, metal frame"=0.833. These are significantly lower than conventional estimates. It's my understa…
-
Hi @JSpielbauer
During your recent Trane 3D presentation you presented an Autodesk Revit model exported as a gbXML file.
It would be great if you could share the gbXML file you generated. Even…
-
**Submitting author:** @leijerry888 (Xuechen Lei)
**Repository:** https://github.com/pnnl/ConStrain
**Branch with paper.md** (empty if default branch): joss_paper
**Version:** 0.4.0
**Editor:** Pendin…
-
It will be great to have the chart showing points (8760) instead of bars, like the one below:
![image](https://user-images.githubusercontent.com/67355063/168959441-e03dc719-cccd-4354-bd78-9faea63ada7…