-
### Description of the bug
Seams have gaps, holes or just look worse than before:
1. GOOD: Prusa Mini+ firmware 4.x+ Slicer 2.7.0x
2. NOT GOOD: Prusa Mini+ firmware 5.1+ Slicer 2.7.1, input shaper …
-
**Describe the bug**
Printer refuses to print with TPU and AMS, even though I've never had an issue with many rolls of TPU
**To Reproduce**
Load TPU into AMS
Enter that information into AMS
T…
AbeFM updated
3 months ago
-
The filament should, according to me, have a completely straight path through the Exrtuder unit.
When I check the MK3 extruder, it seems that the extruder motor is seated 0.5 mm laterally.
This me…
-
Why not have a option to do the preheat for the user
I have a gcode file I use for this
it preheats extrudes a tiny bit then retracts the filament pauses so that I get a notification from octosl…
-
### Version
All
### Operating system type + version
Feature request
### 3D printer brand / version + firmware version (if known)
Feature request
### Behavior
Feature request
_Is this a…
-
### Version
latest dev version
### Behavior
First, I want to say that the modifier creation option recently added IS AWESOME.
This is a feature request. MAny times you have different object in t…
-
I'm using danger klipper, which has PID profiles, and I was trying to set the pid profile of a filament like this `SETUP_FILAMENT name=abs extruder=260 bed=105 chamber=60 pid=abs pa_inner_wall=0.02 pa…
-
I believe the SDE needs to be updated, some items such as the new needlejack filaments are not being found and are highlighted red, with the type_id 0. These items should be present in ESI pulls for m…
-
### Version
Version 2.2.0 linux-x64
### 3D printer brand / version + firmware version (if known)
Ender 3
Marlin 1.1.6 with BL Touch V3.1
### Behavior
The outer wall (perimeter) is loose when …
-
### Version
Slic3r 1.3.0 -dev
### Behavior
on the second extruder i have another kind of material
and the speed can't be the same of the first extrudeur
can we have for each extruders a possi…