-
### Describe the bug
I monitor to UART1 TX without any data when T1 was configured as Smartaudio, but when changed to IRC Tramp kept receiving some data, but I didn't confirm if it was correct or not…
-
This is a list of known issues especially blockers for the 4.1.0 copter release. (also see [Rover-4.1](https://github.com/ArduPilot/ardupilot/issues/17116), [Plane-4.1](https://github.com/ArduPilot/ar…
-
### Describe the bug
Betaflight 4.4.0 and 4.4.1 is not reliable using JETIEXBUS protocol. Using this protocol the telemetry and FC randomly and suddenly freezes. The motors shut down and the drone cr…
-
What is it going to take to achieve such a thing. im not sure that the mobile SDK will be able to accomplish this task. I'm sitting here looking at a binary with ida and have no clue what to do.
-
### Describe the bug
Hello,
I have a JHEF405 GF16 FC and a betafpv M03 VTX, and I can't seems to make smartaudio working between the two. This is somewhat problematic as this vtx don't have other me…
-
**Describe the bug**
For the electrical self launch JS3 there is bar which shows power consumption of the motor in kWh. However this seems to be wrong by about a factor of 3.
**To Reproduce**
Ste…
-
Hi, it's nice to see interest from [OpenHD](https://github.com/OpenHD/Open.HD) community.
We are looking into designing other versions of CM4Ext Nano board and we might come up with solution that you…
-
### Describe the bug
As per discussion in #13696, there appears to be an issue with the F435 from iFlight and connecting mag sensors to the I2C bus. My issue has only been the mag not connecting bu…
-
# v0.21.0
## User notes
If you don't read anything else, read (and follow) at least this section!
* All pilots are suggested to check their tunes using their preferred method due to the improve…
-
### Describe the bug
When you turn on GPS, the craft name parameter is overwritten. Moreover, all this is stored in EEPROM.
I don’t know, maybe it occurred to someone to do this on purpose, but i…