-
Not sure why github token isn't working. Unable to enter credentials manually - password is interpreted as a username
```
$ hr update head
[INFO] Updating HEAD source code
Username for 'https://…
-
@sharpsensoruser I love the guides you have written they are very helpful! Great job on those.
I'm having trouble getting a clean signal from the Sharp GP2Y0AF15X. I noticed that there are short sp…
-
Hello. I am wondering if I should expect any of these 2 pololu made devices to work with ev3dev / ev3 brick. I checked the pinout (they are simple 3,3V i2c devices) and it seems to match. I tried to u…
-
-
### Description
I read on the wiki for the installation of the frimware but I wanted to install the MK4 cart present on thingverse.
This cart has different deltas for the BLTouch position an…
-
1. In [electronics/README.asciidoc](https://github.com/ut-robotics/picr22-team-mu/blob/electronics/electronics/README.asciidoc),
* specify how many and what type of motors the board can control a…
-
Hello all,
I'm trying to get the xdrip wireless bridge to work for my son, but I am unable to communicate to the HM10.
HM10 appears to be real, according to the picture layout of the chips and it'…
-
I know this is probably like totally abandoned, but I was wondering if there are any examples on how to use this thing at all.
So far the only thing I've managed to determine is that it does not fo…
-
When running the stepper motor continuously over an extended amount of time (30 min +) it overheats.
Will investigate
wsh32 updated
2 years ago
-
I have a Romi + raspi and also built the Pololu arm + gripper. I tested everything with WPILibPi and it worked. However, I would like to set up FTC-Romi as described in https://ftc-romi-docs.readthed…