-
https://github.com/7474/RealDiceBot/blob/master/RealDiceEdge/modules/RealDiceCognitivePyModule/Dockerfile.arm32v7
現状は
https://github.com/Azure-Samples/Custom-vision-service-iot-edge-raspberry-pi/b…
-
I have been trying everything to get my RPi4B to communicate with the USP Plus but I continually get this error
```
pi@ImpactRemote:~/upsplus $ python3 OTA_firmware_upgrade.py
Traceback (most re…
-
Research cellular receivers that we could buy for Pi. This would allow us to SSH to the boat while it is on the water and lets us reboot the boat or send shell commands to the boat. This would also le…
-
I've been trying to get to a bottom of a problem that has plagued me for some time. I have my IOT devices on a separate VLAN with a firewall rule to let me access them from the main LAN. Every so of…
-
issue on writting to pwm
https://github.com/google/periph/issues/363
https://pkg.go.dev/periph.io/x/periph/host/bcm283x#Pin.PWM
how to work with pwm
https://jumpnowtek.com/rpi/Using-the-Raspberr…
-
Some intros to BLE/GATT:
* https://learn.adafruit.com/introduction-to-bluetooth-low-energy/gatt
* https://developer.android.com/guide/topics/connectivity/bluetooth-le.html
* http://www.st.com/en/…
-
Looking at the pictures (and only the pictures) on https://pinout.xyz/boards#formFactor=PHAT
* ReSpeaker 4 Mic Array should be HAT form-factor?
* ReSpeaker 4 Mic Linear Array should be Custom for…
lurch updated
2 years ago
-
I'm running self-hosted Zezere with minimum settings and everything seems to work fine (I can add SSH keys etc.). I have a Fedora IoT running on Raspberry PI 4 (I know it is not officially supported, …
-
Hello,
Is there any example on how to deploy and add a different kind of device other than ti sensor tag?
We have been following this: http://agile-iot.eu/wiki/index.php?title=How_to_develop_a_new_…
-
**Problem:**
Periodically there is an issue 'unable to enumerate USB device' using an IoT device connected to the Raspberry Pi 4B.
The similar behaviour is also observed while using a USB-UART TTL c…