-
I have two splits using teensy's and TRRS jacks correctly sending key strokes across the wire. However, I haven't been able to get an RGB strip to light when connected to the I2C pins. It works when c…
-
Hi: I am modifying your code for a depth sounder and it seems like it might work, but it's gotten into a perpetual reboot cycle, where it reboots every 10 seconds or so. When it's not receiving NMEA2k…
-
## System
## (Issue Summary / Feature Request)
the teensy board developed by https://github.com/PaulStoffregen (http://www.pjrc.com/teensy/) is very popular and I would like to suggest it as a platf…
-
When receiving image buffers over UART on a Teensy 4.1 at 916200 BAUD from an ESP32-Cam nearly all images become corrupted. Corrupted images contain a valid first portion of 1/4 to 3/4 of the image wi…
-
Using Teensy 3.5 clocked above 96 MHz does not work, I suspected you will need to adjust the SPI clock for the higher clock speeds of Teensy 3.5 and Teensy 3.6.
Thanks,
Ed
-
I'm not sure how to connect V_USB_IN (fused, dioded supply from USB) to the Teensy/MicroMod USB_VIN pin.
Teensy uses USB_VIN for power and I'm not sure that USB communication/programming will work …
-
Currently Teensy 3.2 board looks like not supported. I've tried to compile the library with PlatformIO (platform = teensy, framework = arduino, board = teensy31) with these errors in result:
```
l…
-
Hi frtas
With the up coming release of the T4 any plans to update the library for use on the T4?
Thanks
Mike
-
Great tool - love it. I've been using some of these teensy boards for some projects that I need a very compact arduino like board for:
http://www.pjrc.com/teensy/
I can get a teensy, xbee and shield…
-
I've incurred multiple build failures before finally getting https://github.com/fprime-community/fprime-workspace-image/pull/53 merged - which included a CI build of (a semver-tagged release fork of) …