-
Please add an incrementing % indicator to the "Slicing..." text or thermometer bar. Sometimes on vary large or very complex (or worse, both) models, especially at high resolutions, I cannot tell if …
-
Recently 3 of my thermometers became like the image attached.
Already tried to reset, any ideas of what could be happening?
Thanks in advance,
Cheers
![IMG_20240218_090140](https://github.com…
-
```html
```
Renders
![image](https://user-images.githubusercontent.com/944605/51181173-b9223d00-18ca-11e9-9540-78cd10f4c63c.png)
while inverting those lines
```html
```
gives:
![im…
-
Things to do for this driver code:
- Implement msg() function to handle the requests formatting
- Implement initialization of the thermometers and heaters (8? thermometers; 2? heaters)
- Implemen…
-
As relative humidity is already a good measure about moisture effect, absolute humidity (in g/m³) is sometimes much more important, since it does not change with temperature increase and decrease. In …
-
I screwed up the original blue pot setting and I wonder what is the best way of calibrating oven thermocouples from scratch. I calibrated my K thermocouple thermometer in boiling water corrected to ba…
-
Dear Sensor-Watch Makers
Thanks for this nice and clever product. I quite like it!
While using it as a thermometer I found that the temperature reported is about +1°C compared to other thermomet…
-
There is a compatibility issue with the weather2 mod and tough as nails
Weather2:
Your mod only detects vanilla rain and doesn’t detect weather2 rain...so no hydrometer
Tough as nails:
The thermom…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to …
-
![thermometer_preveiw](https://user-images.githubusercontent.com/99472513/163747795-6130f8b9-610b-4f48-ada6-f58a70a3daad.png)